Zeck Audio STAC Force180 Guia de Instalação descarregar pdf (Página 23)

Rev. 1.00 12-02-13 23/41

General Notes

Factory Configuration and Default Startup Configuration

The SmartNodes as delivered from the factory contain both a factory configuration and a default

startup configuration. While the factory configuration contains only basic IP connectivity settings, the

default startup configuration includes settings for most SmartWare functions. Note that if you press and

hold the system button (Reset) for 5 seconds the factory configuration is copied onto the startup

configuration (overwrite). The default startup config is then lost.

IP Addresses in the Factory Configuration

The factory configuration contains the following IP interfaces and address configurations bound by the

Ethernet ports 0/0 and 0/1.

interface eth0

ipaddress dhcp

mtu 1500

interface eth1

ipaddress 192.168.1.1 255.255.255.0

mtu 1500

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 40 41

Sem comentários

Zeck Audio STAC Force180 Guia de Instalação Página 23